2 in 1 Grey Skim Plastering Mortar (1-4MM Uses)
INSEE Mortar 17G is for plastering cast-in place concrete surfaces and precast concrete (WALL PANEL) surfaces. It can help correct various surface defects. such as air bubble holes, small cracks, pock marks and sand marks on the plaster surface of both interior and exterior walls and ceilings. It can also be applied to adjust uneven surface levels by using with INSEE Mortar 16G / 16W Skim Coat.
It is purpose for plastering work for general reinforced concrete structures, precast concrete panel, and plaster surfaces to adjust surfaces to be level for thickness 1-4 mm If required for smooth surface finished, we are recommended for apply final layer with INSEE Mortar Grey Skimcoat.
Properties | Testing Standard | INSEE Mortar 17G |
---|---|---|
1. Compressive strength of 28 Days |
ASTM C109
|
> 7.5 N/mm2
|
2. Adhesion force at 28 days |
ASTM C1583
|
> 0.5 N/mm2
|
Remark : Test result from INSEE Mortar’s laboratory and complying to the measurement of ASTM C109, ASTM C1583
20 Kg (1 bag) per clean water 5.4-5.6 liters can cover an area of approximately 7.5 Sq m at a thickness of 2 mm